Factory Promotional Jual Hdpe Geomembrane - PP Filament Nonwoven Geotextile – Yingfan
Factory Promotional Jual Hdpe Geomembrane - PP Filament Nonwoven Geotextile – Yingfan Detail:
Product Description
Shanghai Yingfan Engineering Material Co., Ltd. is a comprehensive geosynthetics supplier in China. Our products can be widely used in a lot of civil engineering projects such as water conservancy, hazardous waste landfill, tailing waste containment, airport construction, high speed railway construction, etc.
PP(polypropylene) Filament Nonwoven geotextile Introduction
PP filament nonwoven geotextile is spunbonded needle punched geotextile. It is produced by Italy and Germany imported advanced equipment. With the advanced spinning equipment, the filament fineness can reach more than 11 dtex, and strength can reach more than 3.5g/d. Its performance is far higher than our national standard GB/T17639-2008.
In virtue of the superior physical properties and good chemical stability of PP geotextile, it can be applied to any geotechnical engineering environment, especially the alkali environment. Polyester geotextile will be gradually decomposed and strength decrease sharply under alkaline conditions, so using polyester geotextile will cause safety risks of the project.
PP Filament Nonwoven Geotextile Functions
PP filament nonwoven geotextile has the following functions showed in the drawing:
Geotextile Application Areas Versus Geotextile Functions
| Areas of Application | Separation | Filtration | Drainage | Reinforcement | Protection | Waterproofing |
| Paved and Unpaved Roads | ||||||
| Wet soft subgrade | X | X | X | O | ||
| Firm subgrade | X | O | O | O | ||
| Repaving | O | O | X | |||
| Drainage | O | X | O | |||
| Sports Fields | X | X | ||||
| Erosion Control/Hydraulic Construction | O | X | ||||
| Railroads | X | X | ||||
| Geomembrane Containment | O | X | O | O | X | O |
| Embankments | X | X | X | O | ||
| Retaining Walls | O | X | X | |||
| Tunnels | O | X | ||||
| Symbols — X: Primary Function O: Secondary Function | ||||||
Features
PP Filament Nonwoven Geotextile VS PET filament Nonwoven Geotextile
1. Lower density than PET geotextile with larger area based on the same strength.
2. Better chemical resistance than PET geotextile.
3. Higher abrasion resistance than PET geotextile.
4. More hydrophobe than PET geotextile.
5. Higher strength than PET geotextile based on same unit weight.
PP filament nonwoven geotextile properties far exceed our national standard GB/T 17639-2008, its technical properties are showed as below:
| No. | Value SPE. | 100 | 150 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 1000 | |||||||||
| Item | ||||||||||||||||||||
| 1 | GSM (g/m2) | 100 | 150 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 1000 | |||||||||
| 2 | Tensile Strength kN/m | 6.5 | 10 | 16 | 21 | 30 | 37.5 | 45 | 50 | 56 | 65 | |||||||||
| 3 | Tensile Strength Elongation % | 40-110 | ||||||||||||||||||
| 4 | CBR Bursting strength,kN≥ | 1.2 | 2.0 | 2.5 | 3.8 | 5.0 | 5.6 | 7.2 | 8.7 | 9.1 | 9.4 | |||||||||
| 5 | Thickness mm (2Kpa) | 0.9 | 1.25 | 1.4 | 1.8 | 2.2 | 2.8 | 3.5 | 3.8 | 4.3 | 4.8 | |||||||||
| 6 | Trapezoid Tear Strength，kN≥ | 0.18 | 0.46 | 0.65 | 0.75 | 1.10 | 1.20 | 1.30 | 1.45 | 1.60 | 1.75 | |||||||||
| 7 | Grip Strength kN≥ | 0.2 | 0.75 | 1.0 | 1.6 | 2.0 | 2.5 | 3.5 | 4.0 | 4.35 | 4.8 | |||||||||
| 8 | Holding Elongation % | 50-120 | ||||||||||||||||||
| 9 | Puncture Resistance KN≥ | 0.19 | 0.33 | 0.42 | 0.55 | 0.8 | 0.92 | 1.0 | 1.05 | 1.3 | 1.4 | |||||||||
| 10 | Dynamic Punching Size mm | 34 | 25.8 | 22.8 | 17.5 | 14 | 11.7 | 9.6 | 8.9 | 5.3 | 4.6 | |||||||||
| 11 | Equivalent opening size O90，mm | 0.26 | 0.21 | 0.16 | 0.11 | 0.08 | 0.08 | 0.08 | 0.07 | 0.07 | 0.06 | |||||||||
| 12 | Vertical Flow Rate l/m2/s | 130 | 105 | 85 | 80 | 78 | 45 | 38 | 32 | 27 | 22 | |||||||||
| 13 | Vertical Permeability coefficient, m/s | 2 x 10-3 | ||||||||||||||||||
| 14 | Chemical Resistance (PH) | 2-13 | ||||||||||||||||||
| 15 | UV Resistance % | ≥70 (strength retention rate) | ||||||||||||||||||
PP Filament Nonwoven Geotextile Specifications:
1. 90g/m2—1000g/m2.
2. The width range is 1meter-6meters; Maximum width is 6meters; Other width can be custom.
3. The length can be 40, 50, 80, 100, 150, 200, 250 meters or as request. Maximum length is depending on the rolling limit.
4. White color is most ordinary and popular color, other color can be custom.
300gsm PP filament nonwoven geotextile
PP filament nonwoven geotextile black
PP Filament Nonwoven Geotextile
Application
PP filament nonwoven geotextile can be applied to a lot of geotechnical engineering environment such as highway, railway(HSR), airport, seaport, landfill, tailings dam, fly ash landfill, ash dam ppl, artificial wetlands, rivers and lakes governance, reservoirs, canals, land reclamation, sewage treatment works etc. It is most suitable to be applied in alkali conditions such as heap leaching ponds, landfill, tailing waste dam, ash dam, these anti-seepage or reinforcement projects with direct contact with cement in water conservancy or transportation, etc.
| Installation Project Cases | |||||
| No. | Project Name | Country | Date | Products | Product Quantity(㎡) |
| 1 | Biogas pond lining and covering project in Morden Farming Group (Material supply and installation service) | Henan, China | 2017-Now | HDPE Geomembrane/ geotextile/geogrid/ installation equipment |
2600000 |
| 2 | Heap leach pond lining in Copper and cobalt ore (Installation service) | Congo-Kinshasa | Jul 2014 | HDPE Geomembrane/installation equipment | 285,000 |
| 3 | Shrimp farm lining project in Pulau Seram island of Kingyond Group (Material supply and installation service) |
Indonesia | 2014-2016 | HDPE Geomembrane/ installation equipment |
700,000 |
| 4 | Landfill containment project in Yangshan city (Material Supply and installation service) | Guangdong China | 2015-2017 | HDPE liner/ geotextile/ drainage network/ bentonite GCL/ installation equipment |
400,000 |
| 5 | Hazardous liquid control project in the 2015 Tianjin Explosion event (Material Supply and 24 hours installation service) |
Tianjin China | Aug 2015 | HDPE geomembrane/ geotextile/ installation equipment |
90,000 |
| 6 | Copper mine tailing waste dam lining project in Kitwe city (Material supply and installation service) |
Zambia | Oct 2017 | composite geomembrane/ geotextile/ installation equipment |
164000 |
| 7 | Marine dam lining project in Dafeng, Jiangsu Province (Material supply and installation service) |
Jiangsu, China | 2012-2013 | HDPE Geomembrane 0.75mm thickness | 50,000 |
FAQ
Q1: Can we make the geotextile with unit weight of below 100gsm?
A1: At least 90gsm please.
Q2: What is your MOQ?
A2: For available stock of PP filament nonwoven geotextile, 2000m2 is our MOQ. But for short stock of our ordinary products, our MOQ is 7 tons for ordinary specification.
Q3: Can you produce biodegradable geotextile?
A3: Yes, we can but usually we have MOQ of 10 tons request.
PP filament nonwoven geotextile producers are controlled by just several suppliers in the world. So when a buyer is sourcing this product, it is better to learn more of this product, especially its technical data. We can provide any supports for your inquiry.
Product detail pictures:
Related Product Guide:
We emphasize advancement and introduce new products and solutions into the market each year for Factory Promotional Jual Hdpe Geomembrane - PP Filament Nonwoven Geotextile – Yingfan, The product will supply to all over the world, such as: Czech, Madrid, Swansea, Our company has already have pass the ISO standard and we are fully respect our customer 's patents and copyrights. If the customer provides their own designs, We will guarantee that they will be the only one can have that products. We hoping that with our good products can bring our customers a great fortune.
By lucia from Mozambique - 2018.06.18 19:26
With a positive attitude of regard the market, regard the custom, regard the science, the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
By Jodie from Georgia - 2018.09.19 18:37
